Mains Power Adapter 7,5V Euro
The Digilyzer may be powered by batteries (lifetime approx. eight hours) or by mains power. Neutrik - Minstruments offers a power adapter for external power supply ideally suited for the Digilyzer DL1. Cable length = 2 meter.
Type: Euro - connector. For other connector types you may contact our local representative or simply use an adapter.

Transformer AES3 75/110Ohm DL1
This digital audio transformer enables the measurement of the AES3 75 Ohm standard with the Digilyzer DL1. This is especially required for the transmission of digital signals over longer cables (cable length > 100 m).

MiniSPL
The MiniSPL is a battery powered measuring microphone. It is the perfect accessory for the Minilyzer for acoustical measurements. Alternativelly the MiniSPL may be operated as a stand-alone microphone e.g. connected to a balanced audio-line, a microphone-input or a sound-card.
Factory calibrated. Supplied with Mic clamp, wind protection and individual calibration chart.
Download 'User Manual MiniSPL'

ML1 Adapter -20dB
This passive adapter extends the balanced input range of the Minilyzer up to +40 dBu. This accessory is ideally to be used to measure amplifier power output.
Accuracy 0.1% balanced to balanced.
Download 'User Manual ML1 Adapter -20dB'

Copy Cable
The Copy Cable allows to update firmware between two Minilyzers. Simply connect your Minilyzer with this Copy Cable to a Minilyzer with the new software and within a few seconds you may enjoy all new measurement features.
Download 'User Manual Copy Cable'

Minilyser & Digilyser Soft Pouch
The soft pouch protects your Minilyser or Digilyser against shocks, dust and water. With its convenient belt-clip you can keep your instrument close to you even when you need both hands for other tasks. 

Minirator Soft Pouch
The soft pouch protects your Minirator against shocks, dust and water. With its convenient belt-clip you can keep your Minirator close to you even when you need both hands for other tasks.

Minstruments System Case
Store your valuable Minstruments test system, adequately in the compact System Case which gives you extra space for cables, connectors and other accessories you may wish to bring along when you are 'out in the fields' checking audio systems.

MiniSPL Case
Store your valuable microphone adequately in the compact case which you may wish to bring along when you are 'out in the fields' checking audio systems.