Minirator MR2 Minilyzer ML1 Digilyzer DL1 MiniLINK AL1 Acoustilizer MR-PRO MiniSPL Accessories Ordering Info

Minirator MR1

Minirator MR1 is the powerful analog audio generator providing a comprehensive set of analog audio test signals as required by a professional audio environment.
This handy tool enables you to stimulate any analog device with a broad range of appropriate signals for performance checking, maintenance and repairs.

Convenient reliable and optimized - Minirator fits into your pocket as well as in your budget.

Product-details

Signals:

• Sine Wave
• Square Wave
• Frequency Sweep
• White Noise
• Pink Noise
• Polarity Test Signal

Features:

• 20Hz to 20kHz, adjustable
  in 1/3rd octave steps
• Level adjustable
• Low distortion

Downloads

Flyer Minstruments - 392 KB - PDF
Specifications - 38 KB - PDF
Testreport Sono Magazine - 3922 KB - PDF
User Manual english - 510 KB - PDF
Wavefile Generator - 1831 KB - ZIP

^^ UP ^^

Minilyser ML1

Minilyzer ML1 is the state-of-the-art analog audio analyzer that fits into the palm of your hand. It provides you with a comprehensive set of functions essential for the analysis of professional audio systems.
The powerful Minilyzer continuously measures the signal and displays the desired results with all complementary information on an illuminated hi-res graphical LC-Display.

The Minilyzer with software V2.00 (or higher) and the MiniSPL are forming a comprehensive integrating sound level meter.

Product-details

Measurement functions:

• Level RMS, Relative
• Sound Pressure Level
• Distortion Analyzer ( THD+N )
• VU & PPM Meter
• Speaker Polarity Test(for all speaker types)
• Signal Balance Error
• Frequency-/Time-Sweep Recording
• 1/3rd Octave Spectrum RMS & SPL
• Scope

More ...

• Accessories
• Screenshots
  

Downloads

Awards received - 223 KB - PDF
Flyer Minstruments - 392 KB - PDF
Overview Filters ML1 - 103 KB - PDF
Overview Software Releases - 14 KB - PDF
Specifications - 137 KB - PDF
Testreport Sono Magazine - 3922 KB - PDF
Update Instruction ML1 - 104 KB - PDF
User Manual english - 520 KB - PDF
Wavefile Generator - 1831 KB - ZIP

^^ UP ^^

Digilyser DL1

The brand new Digilyzer DL1 provides a comprehensive set of analysis functions for digital audio and video related audio signals. Digilyzer DL1 handles virtually all digital audio formats including ADAT and sampling frequencies up to 96 kHz. The simple and intuitive operation allows to monitor, analyzer and troublshoot any digital signals. The Digilyzer is a handheld, battery powered device with optional mains power supply.

Product-details

• AES3, S/PDIF, TOS-Link
• ADAT Interface
• Sampling Frequency 32-96 kHz
• Digital Audio Analysis
• Carrier Status Analysis
• Carrier Signal Measurement
• Dual Domain Monitor Speaker
• Comprehensive Event Logger

More ...

• Accessories
• Screenshots
  

Downloads

Flyer Digilyzer - 1440 KB - PDF
Practical Approach DL1 - 427 KB - PDF
Technical Specifications - 61 KB - PDF
User Manual DL1 english - 769 KB - PDF

^^ UP ^^

MiniLINK

MiniLINK – the new USB interface for the Minilyzer ML1 and Digilyzer DL1 puts the Minstruments into a new league of affordable Measurement tools.

MiniLINK allows documentation and data acquisition of all ML1/DL1 functions in conjunction with the easy to use MiniLINK PC application. In conjunction with the new firmware for Minilyzer (release 3.xx) and Digilyzer (release 2.xx), the instruments are able to store and transfer screen shots and measurement data for post processing. MiniLINK is an upgradeable kit for all existing and new Minilyzers and Digilyzers. It consists of a small plug-in USB interface board that can be easily installed without any tools.

Product-details

• Storing measurement results and screenshots into the ML1 / DL1 flash memory.
• Transferring all stored data to the PC.
• Printing screenshots or copying them into your documentation.
• Logging on-line measurement results onto the PC and storing them as ASCII files (easy Excel import)
• Visualizing the ML1/DL1 display on your PC in full screen mode for presentations / education.
• Upgrading the ML1/DL1 firmware (future firmware releases can be obtained by Internet).
• Storing personified start-up screens into the instruments (for registered users).

MiniLINK available July 2003

MiniLINK USB Interface PCB inserted
to the ML1`s battery compartment.

MiniLINK Screenshot Example ML1 (Firmware 3.xx).
In the new ML1/DL1 Firmware the MEM item is added to the menu bar for easy Memory access. It is available for all functions of the ML1/DL1.		Stored data can be recalled and deleted on the ML1/DL1 Memory screen. Handling is as easy as using a digital camera.

More ...

• Accessories

Downloads

Flyer MiniLINK - 251 KB - PDF

^^ UP ^^

MiniSPL

The MiniSPL is the perfect accessory to the Minilyzer for acoustical measurements. The MiniSPL is a battery powered measuring microphone. Together with the Minilyzer they are forming an integrating sound level meter. Additionaly it may be operated as a stand-alone microphone e.g. connected to a balanced audio-line, a microphone-input or a sound-card.

Product-details

• Battery powered
• No Phantom power required
• 1/2" microphone, Class 2 acc. IEC 60651
• Omni-directional
• Supplied with Mic clamp, wind protection
• Individual calibration chart included

MiniSPL together with Minilyzer:

• Measurements: SPL, min./max., Leq
• Frequency weighting filters (A, C, linear)
• Time response (fast, slow, impulse)
• Integration start, pause, stop
• 1/3rd octave spectrum analyzer

More ...

• Accessories

Downloads

Flyer Minstruments - 392 KB - PDF
Specifications - 50 KB - PDF
Typ. Calibration Certificate - 1612 KB - PDF
User Manual english - 339 KB - PDF

^^ UP ^^

Accessories

	Mains Power Adapter 7,5V Euro The Digilyzer may be powered by batteries (lifetime approx. eight hours) or by mains power. Neutrik - Minstruments offers a power adapter for external power supply ideally suited for the Digilyzer DL1. Cable length = 2 meter. Type: Euro - connector. For other connector types you may contact our local representative or simply use an adapter.
	Transformer AES3 75/110Ohm DL1 This digital audio transformer enables the measurement of the AES3 75 Ohm standard with the Digilyzer DL1. This is especially required for the transmission of digital signals over longer cables (cable length > 100 m).
	MiniSPL The MiniSPL is a battery powered measuring microphone. It is the perfect accessory for the Minilyzer for acoustical measurements. Alternativelly the MiniSPL may be operated as a stand-alone microphone e.g. connected to a balanced audio-line, a microphone-input or a sound-card. Factory calibrated. Supplied with Mic clamp, wind protection and individual calibration chart. Download 'User Manual MiniSPL'
	ML1 Adapter -20dB This passive adapter extends the balanced input range of the Minilyzer up to +40 dBu. This accessory is ideally to be used to measure amplifier power output. Accuracy 0.1% balanced to balanced. Download 'User Manual ML1 Adapter -20dB'
	Copy Cable The Copy Cable allows to update firmware between two Minilyzers. Simply connect your Minilyzer with this Copy Cable to a Minilyzer with the new software and within a few seconds you may enjoy all new measurement features. Download 'User Manual Copy Cable'
	Minilyser & Digilyser Soft Pouch The soft pouch protects your Minilyser or Digilyser against shocks, dust and water. With its convenient belt-clip you can keep your instrument close to you even when you need both hands for other tasks.
	Minirator Soft Pouch The soft pouch protects your Minirator against shocks, dust and water. With its convenient belt-clip you can keep your Minirator close to you even when you need both hands for other tasks.
	Minstruments System Case Store your valuable Minstruments test system, adequately in the compact System Case which gives you extra space for cables, connectors and other accessories you may wish to bring along when you are 'out in the fields' checking audio systems.
	MiniSPL Case Store your valuable microphone adequately in the compact case which you may wish to bring along when you are 'out in the fields' checking audio systems.